In the density measurement of a cube,the mass | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The density $\rho$ of a cube is given by $\rho = \frac{m}{L^3}$,where $m$ is the mass and $L$ is the edge length.Given: $m = 10.00 \, kg$,$\Delta

Vedclass · Accepted Answer

None of these

Vedclass · Answer

(D) The density $\rho$ of a cube is given by $\rho = \frac{m}{L^3}$,where $m$ is the mass and $L$ is the edge length.Given: $m = 10.00 \, kg$,$\Delta m = 0.10 \, kg$,$L = 0.10 \, m$,$\Delta L = 0.01 \, m$.The measured density is $\rho = \frac{10.00}{(0.10)^3} = \frac{10.00}{0.001} = 10000 \, kg/m^3$.Since the relative error in $L$ is $\frac{\Delta L}{L} = \frac{0.01}{0.10} = 0.1$,which is not small,we calculate the maximum and minimum possible density values.$\rho_{max} = \frac{m + \Delta m}{(L - \Delta L)^3} = \frac{10.10}{(0.09)^3} = \frac{10.10}{0.000729} \approx 13854.6 \, kg/m^3$.$\rho_{min} = \frac{m - \Delta m}{(L + \Delta L)^3} = \frac{9.90}{(0.11)^3} = \frac{9.90}{0.001331} \approx 7438.0 \, kg/m^3$.The absolute error in density is $\Delta \rho = \frac{\rho_{max} - \rho_{min}}{2} = \frac{13854.6 - 7438.0}{2} = \frac{6416.6}{2} = 3208.3 \, kg/m^3$.Since this value is not among the given options,the correct choice is $D$.

In the density measurement of a cube,the mass and edge length are measured as $(10.00 \pm 0.10) \, kg$ and $(0.10 \pm 0.01) \, m$ respectively. The error in the measurement of density is

Similar Questions

The pressure on a square plate is measured by measuring the force on the plate and the length of the sides of the plate. If the maximum percentage error in the measurement of force and length are respectively $4\%$ and $2\%$,the maximum percentage error in the measurement of pressure is ....... $\%$

The measurements of two quantities along with the precision of their respective measuring instruments are $A = 2.5 \, m/s \pm 0.5 \, m/s$ and $B = 0.10 \, s \pm 0.01 \, s$. The value of $AB$ will be:

The relative density of the material of a body is found by weighing it first in air and then in water. If the weight in air is $(5.00 \pm 0.05) \ N$ and the weight in water is $(4.00 \pm 0.05) \ N$,then the relative density along with the maximum permissible percentage error is:

Why should the measurement of physical quantities with large exponents in an experiment be taken with high precision?

Vedclass Test Series

Exam Paper Generator

Online Exam Module